Valaistus/Koristevalaistus/LED-Nauhat

SmartLife LED-Nauha

Wi-Fi | Kylmä Valkoinen / Lämmin Valkoinen / RGB | SMD | 5.00 m | IP44 | 2700 - 6500 K | 960 lm | Android™ / IOS

Ominaisuudet

Valmistajan koodi: WIFILS50CRGBW
EAN: 5412810303106
• Helppo asentaa - yhdistämällä LED-nauhan Wi-Fi-verkkoon voit ohjata ja ajastaa sitä
• Käytettävissä on punainen, vihreä ja sininen väri, tai voit valita lämpimän tai viileän valkoisen valon mielialasi mukaan
• Nauhaa voi lyhentää tai pidentää - loputtomia mahdollisuuksia
• Kaksipuolinen liima (3M) valmiina paikallaan - helppo asennus
• Toimii itsenäisenä älyvalona tai muiden SmartLife-tuotteiden kanssa osana kokonaista älykotia
Tällä älykkäällä LED-nauhalla voit luoda tunnelmaa mihin tahansa huoneeseen. Ohjaa sitä Nedis SmartLife -sovelluksella, aseta ajastuksia tai automaatioita tai ohjaa LED-nauhan kirkkautta ja väriä käyttämällä ääniohjausjärjestelmää. Nauhan voi yhdistää suoraan Wi-Fi-verkkoon ilman erillistä keskitintä.
LED-nauha yhdistää sekä RGB:n että lämpimän ja viileän valkoisen LED-valon, joten voit asettaa minkä tahansa värin tai käyttää nauhaa lämpimän tai viileän valkoiseen epäsuoraan valaistukseen
Viiden metrin pituutta voidaan lyhentää tai pidentää vastaavilla LED-nauhoilla, mikä tarjoaa rajattomasti mahdollisuuksia
Kaksipuolinen liima (3M) on valmiiksi paikallaan, joten nauha on helppo asentaa mille tahansa puhtaalle ja tasaiselle pinnalle.

Pakkaus

Pakkaussisältö

RGBW LED -nauha (5 m)
Wi-Fi-ohjain
Virtalähde
Pika-aloitusopas

Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella

Leveys Korkeus Pituus
50 mm 190 mm 185 mm

Logistiset mitat

Pakattu per Leveys Korkeus Pituus Paino
1 182 mm 50 mm 210 mm 420 g
8 195 mm 245 mm 420 mm 3720 g
32 410 mm 440 mm 510 mm 16000 g

Tuotteen tekniset tiedot

Leveys 151 mm
Korkeus 8 mm
Syvyys 5000 mm
Paino 310 g
Tulojännite 220 - 240 V AC 50/60 Hz
Maksimi lähetysantennin vahvistus 2.5 dBi
Sopii käytettäväksi Nedis® SmartLife
Virtalähteen kaapelin pituus 1.50 m
Maksimi lähetysteho 16 dBm
Värintoistoindeksi (Ra) 80
Valon väri Kylmä Valkoinen
Lämmin Valkoinen
RGB
Sovellus saatavana kohteeseen Android™
IOS
IP suojaluokitus IP44
Maksimi virrankulutus 15 W
Pakkauksessa olevien tuotteiden määrä 1 kpl
Väri Monivärinen
Virtapistoke Euro (CEE 7/16)
Himmennettävä Kyllä
Lampun nimellinen käyttöikä 20000 h
Tuettu langaton tekniikka Wi-Fi
Leikattava Kyllä
Energiankulutus /1000h 15 kWh
Materiaali Silikoni
Kiinnike Pinta-asennettu
Jatkettava valonauha Kyllä
Lähetystaajuuden alue 2412 - 2484 MHz
Laitteen tulovirran liittimet DC
Värilämpötila 2700 - 6500 K
Energialuokka F
Nimellisvaloteho 960 lm
Johdon pituus 5.00 m
LED Tyyppi SMD
LED-moduuli SMD 5050
Lediä per metri määrä 90 kpl

Tuki

Usein kysytyt kysymykset

Olemme löytäneet seuraavat kysymykset englanniksi

No, the LED's are not individually addressable.

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

Ensure that you only take off the plastic protection and not the entire adhesive strip.
If you remove the whole strip, you will not be able to stick it to anything.

Yes, you can purchase another set and plug the second strip in the first one.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.