Turvallisuus ja valvonta/Kamerat/Ulkokamerat

SmartLife Ulkokamera

Wi-Fi | Full HD 1080p | Kääntö/kallistus | IP65 | Pilvipalvelutallennus (valinnainen) / Sisäinen 16GB | 12 V DC | Liiketunnistimella | Yökuvaus | Valkoinen

Ominaisuudet

Valmistajan koodi: WIFICO20CWT
EAN: 5412810290062
• Älykäs IP-ulkokamera tarjoaa helpon tavan asentaa langattomasti yhdistetyn turvajärjestelmän kodin ulkopuolelle.
• Full HD-tarkkuus kristallinkirkkaisiin tallenteisiin
• Helppo yhdistää suoraan omaan Wi-Fi-verkkoon - erillistä keskitintä ei tarvita
• Mukana toimitetaan kamerateline
• Tukee täysin kaikkia Nedis® SmartLife -valikoiman tuotteita.
Kodin automatisoinnista tuli juuri entistä helpompaa. Tämän helppokäyttöisen älykkään IP-ulkokameran voi yhdistää kätevästi olemassa olevaan Wi-Fi-verkkoon, jotta sillä voi valvoa kotisi ulkoalueita ja tallentaa äänen tai liikkeen.

Full HD-tarkkuus
Se tallentaa selkeitä kuvia Full HD-tarkkuudella (1920 x 1080 pikseliä). Lisäksi kamera on yhtä tehokas yöllä: sen yökuvaustilan kantama on 15 metriä.

Vedenpitävä
IP-kamera on erittäin kestävässä vesitiiviissä kotelossa ja siinä on peräti 16 Gt sisäistä muistia.

Kristallinkirkas
Kamera tallentaa Full HD-videoita ja -kuvia 1920 x 1080 pikselin tarkkuudella 1/3 tuuman CMOS-kennolla, jotta kuvat ovat kristallinkirkkaita, ja kamera käynnistyy, kun se havaitsee ääntä tai liikettä.

Kaksisuuntainen yhteys
Kameran kautta voi keskustella, koska siinä on kaksisuuntainen puhe ja kuuntelu käytössä. Sitä voi siis käyttää puhelimen tapaan sen kantaman alueella.

Helppo asennus
Yksikön mukana toimitetaan kamerateline, ja sen pikaoppaan avulla asennus onnistuu nopeasti.

Nedis SmartLife
Löydä laaja ja alati kasvava valikoima tuotteita, kuten polttimoita, katkaisijoita, pistorasioita, antureita ja kameroita, joita voi ohjata helppokäyttöisellä ja intuitiivisella sovelluksella.
Etsitpä sitten yksittäistä älypolttimoa tai -pistorasiaa tai haluat automatisoida koko kotisi, tutustu siihen, kuinka helposti saatavilla älyteknologia on nykyään.

Pakkaus

Pakkaussisältö

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Jälleenmyyntipakkauksen mitat Lahjapakkaus lukituksella

Leveys Korkeus Pituus
95 mm 95 mm 195 mm

Logistiset mitat

Pakattu per Leveys Korkeus Pituus Paino
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Tuotteen tekniset tiedot

Leveys 75 mm
Korkeus 105 mm
Syvyys 75 mm
Paino 350 g
Väri Valkoinen
Sisäänrakennettu mikrofoni Kyllä
Tulovirta 1.0 A
Virtalähteen tyyppi Verkkovirtakäyttöinen
Materiaali Muovi
Virtapistoke Euro/Tyyppi C (CEE 7/16)
Pilvipalvelutallennus mahdollisuus Kyllä
Integroidut kaiuttimet Kyllä
Sopii käytettäväksi Nedis® SmartLife
Katselukulma 110 °
Kuvapiiri 1/3" CMOS
LED 1
Tarvikkeet Kameran Asennusteline
Verkkosovitin EU-Pistoke
IP suojaluokitus IP65
Virtalähteen kaapelin pituus 1.50 m
Maksimi lähetysteho 15 dBm
Yökuvaus 15 m
Maksimi lähetysantennin vahvistus 3 dBi
Infrapuna hämäränäkö Kyllä
Linssi 2.8 mm
Kuvaa per sekunti 25 fps
Tallennustyyppi Sisäinen 16GB
Pilvipalvelutallennus (valinnainen)
Laitteen tulovirran liittimet DC 5.5 x 2.1 mm
Maksimi virrankulutus 12 W
Maksimi kuvantarkkuus Full HD 1080p
Kallistuskulma 85 °
Megapikselit 2 MPixel
Panorointiasteet 355 °
Kameran malli PTZ kamera
Virta Ethernetin yli - tuki Ei
Kalansilmä Ei
Liiketunnistimella Kyllä
Sovellus saatavana kohteeseen Android™
IOS
Lähetystaajuuden alue 2400 - 2483.5 MHz
Tulojännite 12 V DC
Kääntö/kallistus Kyllä
Pakkauksessa olevien tuotteiden määrä 1 kpl
Himmennettävä Kyllä
Tuettu langaton tekniikka Wi-Fi
Ohjelmoitava Kyllä
Toimintalämpötila-alue -20 - 50 °C

Tuki

Usein kysytyt kysymykset

Olemme löytäneet seuraavat kysymykset englanniksi

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.