SmartLife Intelligens Csatlakozó

Wi-Fi | Teljesítmény mérő | 3680 W | Földelt csatlakozó / F típus (CEE 7/7) | -20 - 50 °C | Android™ / IOS | Fehér

Jellemzők

A beszállító cikkszáma: WIFIP120FWT
EAN kód: 5412810269952
• Különálló termékként vagy egyszerűen csatlakoztatva más Nedis® SmartLife termékekhez egyaránt használható
• Távoli és automatizált vezérlést tesz lehetővé - a berendezések ütemezéséhez és összekapcsolásához
• A hangvezérlés támogatása - az Amazon Alexa vagy a Google Home szolgáltatással összhangban
Vezéreljen sok elektromos berendezést távolról, egyszerűen ebbe a vezeték nélküli intelligens csatlakozóba dugva, és csatlakoztassa őket okostelefonhoz vagy táblagéphez a Wi-Fi routeren keresztül. A praktikus teljesítményfigyelővel azonnal leolvashatja, a berendezés egy adott pillanatban, illetve az idő során pontosan mennyi teljesítményt fogyaszt.

Egyszerű beállítás
A csatlakoztatott berendezések és eszközök vezérléséhez és automatizálásához nem kell műszaki zseninek vagy szerelőnek lenni. Nincs szükség másra, csak egy intelligens csatlakozóra és a Wi-Fi routerre. Intuitív alkalmazásunk segítségével a berendezések távolról automatikusan ki- és bekapcsolhatók. Akár olyan hangvezérlő rendszerekhez csatlakoztatva is működik, mint az Amazon Alexa és a Google Home.

Ütemezés és párosítás
Állítsa be a csatlakozón a berendezések bekapcsolásának ütemezését, vagy másokhoz csatlakoztatva őket hozzon létre hangulati jeleneteket, amelyek egyetlen parancsra vagy gombnyomásra aktiválhatók.

A teljesítményfelhasználás figyelése
Állapítsa meg azonnal, ha egy berendezés túl sok áramot fogyaszt, és gondoskodjon intelligens és energiahatékony otthonról.

A Nedis SmartLife
Fedezze fel az egyetlen egyszerűen használható és intuitív alkalmazáson keresztül vezérelhető termékek - például izzók, kapcsolók, aljzatok, érzékelők és kamerák - széles körű és folyamatosan bővülő választékát. Az Amazon és a Google Home által támogatott hangvezérlési funkciók, valamint az, hogy meglévő Wi-Fi-hálózatán kívül nincs másra szükség, a csatlakoztatott, intelligens otthont igazán egyszerűvé teszik.
Keressen csupán egy intelligens izzót vagy aljzatot, vagy automatizálja akár az egész házat, az intelligens technológia ma már rendkívül könnyedén hozzáférhető.

Csomagolás

A csomag tartalma

Okoscsatlakozó
Gyors üzembehelyezési útmutató

A kiskereskedelmi kiszerelés méretei Ajándékdoboz eurolockkal

Szélesség Magasság Hossz
103 mm 157 mm 61 mm

Logisztikai méretek:

Csomagolva Szélesség Magasság Hossz Súly
1 105 mm 150 mm 60 mm 159 g
5 115 mm 140 mm 325 mm 900 g
40 340 mm 300 mm 465 mm 7680 g

A termék műszaki adatai

Szélesség 55 mm
Magasság 100 mm
Mélység 75 mm
Súly 104 g
Szín Fehér
Anyag Műanyag
A következő típusokkal kompatibilis: Nedis® SmartLife
Maximális adó antenna nyereség 2 dBi
Teljesítmény mérő Igen
Eszköz táp bemeneti csatlaakozó(k) Hybrid (CEE 7/7)
Maximális adó erősség 15.73 dBm
Kimeno áram 3680 W
Áramfelvétel 16 A
Az alkalmazás elérhető: Android™
IOS
Adó frekvencia tartomány 2412 - 2472 MHz
Dugasz F típus (CEE 7/7)
Csomagolás típusa Gift Box with Euro Lock
Támogatott kábelnélküli technológia Wi-Fi
Működési hőmérséklet tartomány -20 - 50 °C
Eszköz táp kimeneti csatlaakozó(k) Földelt csatlakozó / F típus (CEE 7/7)
Földelés típusa Földelt csatlakozó
Bemeneti feszültség 230 V AC

Segítség

Gyakran Feltett Kérdések

A következő angol nyelvű kérdéseket találtuk Önnek

Go to the settings menu of the plug > remove device and data
Then go to Profile > settings > clear cache
Now reset the plug and add it back to the app

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the plug so it blinks slow.

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

Mutassa az összes terméket: