Sûreté et sécurité/Visiophone/Visiophone

Vidéophone SmartLife

Wi-Fi | Alimenté par pile | Full HD 1080p | microSD (non inclus) / Stockage dans le Cloud (facultatif) | IP54 | Avec capteur de mouvement | Vision nocturne | Gris

Caractéristiques

Référence Constructeur: WIFICDP20GY
Code EAN: 5412810330287
• Envoie des notifications push sur votre smartphone lorsque quelqu'un s'approche (détecteur de mouvements PIR) ou sonne
• Alimentation par batterie, pour une solution entièrement sans fil • La détection de mouvements peut également être désactivée (par exemple si votre porte donne directement sur la rue)
• Communication bidirectionnelle pour parler à vos visiteurs où que vous soyez
• Enregistrement Full HD (1080p) et zoom numérique sur votre smartphone pour une vue détaillée
• Les enregistrements sont stockés sur une carte microSD de 128 Go (non fournie) : revoyez ce qui s'est passé
• Intégration dans l'application Nedis® SmartLife
• Peut être complétée avec le carillon de porte sans fil (WIFICDPC10BK, non inclus) pour entendre la sonnerie lorsque vous êtes à la maison, où que votre téléphone se trouve
Avec cette sonnette vidéo Nedis SmartLife, vous savez toujours s'il y a quelqu'un à votre porte, où que vous soyez. Dès que votre visiteur sonne à la porte ou, grâce au détecteur de mouvements PIR, dès qu'il s'approche de votre porte d'entrée, vous recevez une notification push sur votre smartphone. Vous pouvez ensuite lancer un appel vidéo, par exemple pour demander à un coursier de déposer le colis chez vos voisins ou bien dire à un vendeur que vous n'êtes pas intéressé, et tout cela sans ouvrir la porte.

Étant donné que vous êtes en mesure de répondre à partir de n'importe où dans le monde, tant que votre smartphone dispose d'une connexion Internet, cela augmente également la sécurité du domicile, en faisant croire que vous êtes à la maison.
La caméra Full HD (1080p) dispose d'un angle de visualisation de 180 ° et prend en charge la vision de nuit, vous permettant de voir clairement qui est à votre porte 24 h/24.

Pas de soucis si vous n'avez pas le temps d'ouvrir la porte. Les images sont stockées sur une carte microSD afin que vous puissiez les regarder quand vous le souhaitez.

Cette sonnette vidéo entièrement sans fil est facile à installer car elle est alimentée par batterie et n'a donc besoin d'aucune connexion, sauf Wi-Fi.
Complétez cette sonnette vidéo de notre carillon de porte Nedis (WIFICDPC10BK) pour entendre la sonnerie même si votre smartphone est éteint.

Emballage

Contenu de l'emballage

Sonnette Vidéo
Support mural
Câble USB
Matériel d'installation
Guide de démarrage rapide

Dimensions emballage retail Boîte cadeau avec eurolock

Largeur Hauteur Longueur
162 mm 95 mm 100 mm

Dimensions logistiques

Conditionné par Largeur Hauteur Longueur Poids
1 105 mm 120 mm 165 mm 377 g
10 335 mm 120 mm 495 mm 4100 g
20 355 mm 265 mm 510 mm 8860 g

Spécifications du produit

Largeur 50 mm
Hauteur 141 mm
Profondeur 33 mm
Poids 225 g
Connexion (s) d'entrée d'alimentation de l'appareil Micro USB
Courant d'entrée 1.0 A
Type de source d'alimentation Alimenté par pile
Côté câble d'alimentation B Micro USB
Côté du câble d'alimentation A USB
Couleur Gris
Matériau Plastique
Fonctionnalité d'enregistrement dans le cloud Oui
Vision nocturne 5 m
Compatible avec Nedis® SmartLife
LED 1
Tension d'entrée 5 V DC
Gain d'antenne d'émission maximal 2 dBi
Résolution maximale Full HD 1080p
Avec capteur de mouvement Oui
Accessoires Matériel d'installation
Piles requises (incluses) 2x 18650
Application disponible pour Android™
IOS
Capteur d'image 1/2.9” CMOS
Plage de fréquences de transmission 2412 - 2472 MHz
Consommation électrique maximale 2 W
Capacité de la batterie 5200 mAh
Type de stockage microSD (non inclus)
Stockage dans le Cloud (facultatif)
Puissance d'émission maximale 13 dBm
Classement IP IP54
Angle de vue 180 °
Calotte 1.4 mm
Technologie sans fil sountenu Wi-Fi
Nombre de mélodies 1 Mélodie
Nombre de produits dans l'emballage 1 pièces
Plage de température de fonctionnement -20 - 50 °C
Durée de vie max. d'une pile 4 mois

Assistance

Questions fréquemment posées

Nous avons trouvé les questions suivantes pour vous en anglais

1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range

Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.

Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.

Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.

It is not possible to change the tone and volume on this doorbell model.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.