SmartLife Smart Stecker
Wi-Fi | IP21 | Leistungsmesser | 2500 W | Schutzkontakt / Typ F (CEE 7/7) | -10 - 40 °C | Android™ / IOS | Weiss | 1 Stück
Funktionen
• Ermöglicht Fern- und automatisierte Steuerung - für die Planung und das Verknüpfen von Anwendungen
• Unterstützt Sprachsteuerung - in Kombination mit Amazon Alexa oder Google Home
• Schlankes Design - damit benachbarte Sockel nicht blockiert werden
Einfach einzurichten
Sie müssen kein technisches Genie oder ein Elektriker sein, um Ihre eingesteckten Anwendungen und Geräte zu steuern und zu automatisieren. Tatsächlich benötigen Sie nur einen Smart-Stecker und Ihren WLAN-Router. Mit unserer intuitiven App können Sie Geräte aus der Ferne und automatisch ein- und ausschalten. Sie kann sogar in Verbindung mit Sprachsteuerungssystemen wie Amazon Alexa oder Google Home eingesetzt werden.
Superschlank - keine blockierten Steckdosen
Diese superschlanken Geräte wurden entwickelt, um ein häufiges Problem zu verhindern: Dass Smart-Stecker die angrenzenden Steckdosen blockieren. Unsere Stecker wurden praktisch konzipiert und sind sowohl intelligent als auch schlank.
Planen und verbinden
Richten Sie Zeitpläne für den Stecker ein, um Geräte einzuschalten oder sie mit anderen zu verbinden, um Umgebungskulissen zu erstellen, die mit einem einzigen Befehl oder einem Knopfdruck aktiviert werden können.
Überwachung des Energieverbrauchs
Identifizieren Sie auf einen Blick alle Geräte, die übermäßig viel Energie verbrauchen, um sicherzustellen, dass Sie in einem intelligenten und energieeffizienten Zuhause leben.
Informationen zu Nedis SmartLife
Entdecken Sie eine breite und stetig wachsende Produktpalette - wie Glühlampen, Schalter, Steckdosen, Sensoren und Kameras - die alle über eine benutzerfreundliche und intuitive App gesteuert werden können. Mit den von Amazon Alexa und Google Home unterstützten Sprachsteuerungsfunktionen und nicht mehr als Ihrem bestehenden WLAN-Netzwerk ist dies das leicht gemachte vernetzte Smart-Home schlechthin.
Ganz gleich, ob Sie eine einzelne Smart-Glühlampe oder eine einzige Steckdose suchen oder Ihr gesamtes Haus automatisieren möchten - entdecken Sie, wie zugänglich Smart-Technologie heute ist.
Verpackung
Verpackungsinhalt
Smart-Stecker
Kurzanleitung
Maße Verkaufsverpackung Geschenkbox mit Eurolock
Breite | Höhe | Länge |
---|---|---|
105 mm | 125 mm | 63 mm |
Logistikmaße
Gepackt zu | Breite | Höhe | Länge | Gewicht |
---|---|---|---|---|
1 | 65 mm | 150 mm | 110 mm | 107 g |
50 | 345 mm | 285 mm | 560 mm | 6000 g |
Produkteigenschaften
Breite |
45 mm |
Höhe |
70 mm |
Tiefe |
45 mm |
Gewicht |
57 g |
Farbe |
Weiss |
Material |
Kunststoff |
Kompatibel mit |
Nedis® SmartLife |
maximale Antennenreichweite |
1.5 dBi |
Maximale Sendeleistung |
14 dBm |
Leistungsmesser |
Ja |
Geräteausgangsanschluss |
Schutzkontakt / Typ F (CEE 7/7) |
Geräteeingangsanschluss |
Hybrid (CEE 7/7) |
Ausgang Energie |
2500 W |
Eingangsstrom |
10 A |
App erhältlich für |
Android™ IOS |
Sendefrequenzbereich |
2412 - 2472 MHz |
Netzstecker |
Typ F (CEE 7/7) |
Verpackungsart |
Gift Box with Euro Lock |
Unterstützt Kabellose Technologie |
Wi-Fi |
Ausgangsstrom |
10 A |
Anzahl der Produkte im Karton |
1 Stück |
Betriebstemperaturbereich |
-10 - 40 °C |
Art der Erdung |
Schutzkontaktstecker |
Eingangsspannung |
230 V AC |
IP-Schutzart |
IP21 |
Ausgangsspannung |
230 V AC 50/60 Hz |
Support
Häufig gestellte Fragen
Wir haben die folgenden Fragen auf Englisch für Sie gefunden
How do I reset the energy consumption data?
Go to the settings menu of the plug > remove device and data
Then go to Profile > settings > clear cache
Now reset the plug and add it back to the app
The plug does not want to install in the app with the EZ mode.
Please try the AP mode.
Make sure that you use a 2.4Ghz wifi network.
Reset the plug so it blinks slow.
If it blinks fast, reset it again and it will blink slowly
In the app:
+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.
Hold your phone very close to the plug during the installation
This method uses a direct connection to the device to send the info of your wifi to it.
Holding it close optimises this connection
Can I measure the energy production of solar panels with these plugs?
Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.
Can I use this plug to charge my electric car?
Nedis Smart plugs are designed and tested to be used as power supply for consumer products. Since there are no applicable standards developed yet Nedis Smart plugs are not designed and not tested to be used as a feed-in component into a power grid and/or to be used in combination with solar (balcony) panels.
I want to control my Nedis SmartLife products with Google Assistant. But I can't control them.
To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.
1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.
Now, you can control your devices by Google home products.
How do i add Nedis SmartLife to Google Home?
Add the "Smart Life" service to Google Home (no Nedis in the name).
Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.
Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.
What is an automation?
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
Maximum number of members that can be added to a family.
You can add maximum 20 members.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.